Accelize XpressGX4LP Platform

High-End FPGA Board to accelerate data acquisition.

Engineered to accelerate networking and financial applications, the XP4S530LP-20G features a leading edge Altera Stratix IV FPGA, high bandwidth – high density DDR3 SDRAM memory, and two 10Gb Ethernet links, enabling the ultra-low wire-to-fabric latency required for high-frequency trading, smart feed handling, realtime algorithmic trading, and other types of networking applications.

The combination of PCI Express 2.0, 20Gb of Ethernet connectivity, and high bandwidth memory on a highly integrated low profile card makes the perfect productionready programmable platform for high performance network-based computing.

Technical Specifications

Featured device	Altera EP4SGX530KF40C2N 531 200 Logic Elements, 212 480 Adaptive Logic Modules (ALMs), 424 960 Registers, 2.6 Mb internal memory, 1024 18×18 Hardware multipliers.
Memory devices	High Density / High Bandwidth memory: 2 x 1 Gb DDR3-1066 @ 533 MHz memory Organized in two separate banks with 16 bit data bus. Total Bandwidth = 6,4 GBytes/sec. Total Density = 2 Gbits. Low Latency / High Bandwidth memory: 4 x 9Mbit QDR II+ SRAM Memory @ 300 MHz. Organized into 4 separate banks of 9Mbit width x18. Simultaneous write and read operation. Total memory array bandwidth = 120 GBytes/sec reading + 120 GBytes/sec writing. Total Density = 36 MBytes. Non-Volatile Flash memory device: 1 x 512Mbit parallel flash memory to hold FPGA bitstream configuration and networking interfaces MAC addresses.
Networking Interface	2 x SFP+ ports for 1 Gb/s and 10 Gb/s Ethernet fiber or copper applications.
Internal Buses	PCI Express Generation 2.0 x8 interface.
Power supply	PCI Express powered (12V and 3.3V); no external power source required.
Form factor	PCI Express Standard profile, 1/2 length using 1 PCI-Express Low Profile slot.

High-End FPGA Board to accelerate data acquisition.

Featured device

Altera EP4SGX530KF40C2N

Memory devices

High Density / High Bandwidth memory: 2 x 1 Gb DDR3-1066 @ 533 MHz memory

Low Latency / High Bandwidth memory: 4 x 9Mbit QDR II+ SRAM Memory @ 300 MHz.

Non-Volatile Flash memory device: 1 x 512Mbit parallel flash memory to hold FPGA bitstream configuration and networking interfaces MAC addresses.

Networking Interface

2 x SFP+ ports for 1 Gb/s and 10 Gb/s Ethernet fiber or copper applications.

Internal Buses

PCI Express Generation 2.0 x8 interface.

Power supply

PCI Express powered (12V and 3.3V); no external power source required.

Form factor

PCI Express Standard profile, 1/2 length using 1 PCI-Express Low Profile slot.

High Density / High Bandwidth memory: 2 x 1 Gb
DDR3-1066 @ 533 MHz memory

Non-Volatile Flash memory device: 1 x 512Mbit parallel flash memory to hold FPGA bitstream
configuration and networking interfaces MAC
addresses.

2 x SFP+ ports for 1 Gb/s and 10 Gb/s Ethernet
fiber or copper applications.